займ на карту срочно без отказазайм онлайн
Jun 14

Features of GN Full Hydraulic Drive Decanter Centrifuge

Bowl MaterialDuplex  SS2304/SS2205 from centrifugal casting
Screw MaterialStainless Steel SS 304/ SS 316
Screw ProtectionTungsten Carbide Tiles
Solids DischargeTungsten Carbide Inserts
Bearing BrandSKF
FHD BrandSwitzerland Hydraulic Drive
Electrical ControlPLC Smart Control
Coating BrandCosco & Kansai Zinc Rich Epoxy Coating

明星淫梦GN can supply full hydraulic drive centrifuge to our client from our global network in China, USA, Russia and other international agent.

明星淫梦GN Solids Control just shipped 4 packages of fully hydraulic drive decanter centrifuges to Middle East. As one the world famous decanter centrifuge manufactures, GN Solids Control has been manufacturing different sizes of decanter centrifuges for many years.

20200609 FHD Decanter Centrifuge

Due to the oil price going down and the double effect of COVID-19, the global oil and gas industry is very slow this year. But GN Solids Control succeeded to provide more solids control and waste management systems when customers try to find the most cost-effective equipment. Until now, GN Solids Control has been provided solids control equipment as well as drilling waste management systems to over 70 countries and regions. Word of mouth highly reputation bring more and more orders to GN Solids Control. GN Solids Control has provided hundreds of in Middle East. Usually, orders from Middle East are large orders with strict and high technical demands. With these years fast development, GN Solids Control is always able to provide the decanter centrifuges beyond customers’ expectation as GN wants to take the extra step.

or the Middle East project, GN Solids Control provided 4 sets hydraulic centrifuges, the driven unit is Viscotherm and Rotidiff from Sweden. All these centrifuges are 14 inch bowl, which are made by centrifugal casting and using SS2205 or SS2304. Centrifuge screw propeller is protected by tungsten carbide tiles or build up welding. Besides the 4 sets centrifuges, GN Solids Control also provided 4 sets manual adjust screw pump. Actually GN Solids Control only use top brands, like the feeding pump main parts are made by Netszch.

written by desander desilter

Jun 14

GN Solids Control has been manufacturing shale shakers for decades. GN made shale shakers are widely seen in global drilling rig sites. As one important market for GN Solids Control, India has hundreds of GN shale shakers, mud cleaners, decanter centrifuges and cuttings dryers help customer on solids control and drilling waste management

2020.06.04 DMGS Shale Shaker

As we all know, when provide equipment to India especially to large Indian oil and gas drilling companies, DGMS is mandatory. For these shale shakers that GN Solids Control provided are all DGMS explosion proof certified. GN Solids Control also provides IEC or ATEX explosion proof control boxes suit for different market. 
GN Solids Control now has 3 manufacture plants: 2 close to Beijing International Airport and 1 close to Tangshan City. Now GN Solids Control are using automatic welding robot to weld the shale shake deck in order to keep the welding lines in a good and consistent quality. GN patent C type groove on the shaker deck fixed with oil resistant sealing rubber to keep the shaker screens from leakage. Working angle of the shake deck can be adjusted easily by using a lever to rotate from one side. 
These 4 sets shale shakes are all fixed with 3 pcs shaker screens, which are also made by GN Solids Control. GN shake screens are the most cost effective shaker screens and are certified by USA third party to guarantee the precise API parameters like cut point and conductance.  

2020.06.04 Double Shale Shaker
One of the most advantage of these shakers is every shaker can be moved under linear motion and elliptical motion: Linear motion is suitable for large flow rate drilling mud with low viscosity, high solids content, and big particles especially sturdy solids; while the elliptical motion is mainly used to treat drilling mud with easy broken, high viscosity solids.?
GN Solids Control?only use top brands vibrators like USA Martin or Italy OLI, electrical components inside the control box are mainly Schneider.?
2 panels and 4 panels shale shakers can be also provided, and double deck shakers is optional.

written by desander desilter

May 31

GN Solids control last week delivered every other massive batch of pitless drilling waste control equipment for an global oilfield carrier organisation. GN Solids control has rich revel in on designing and manufacturing turnkey treating equipment which may be successfully used to deal with exceptional sorts of drilling waste consists of OBM, WBM and SBM.

Each year, GN Solids manipulate offers greater than one hundred units package treating systems. Here are the primary treating equipment on this pitless drilling waste management machine.

1.GN hi-G Drying Shaker
GN hi-G Drying Shaker has a bigger G force up to eight.Zero G. With the notable great vibrator to pressure the shaker deck fixed with GN made shale shakers to separate solids from drilling dust. Shaker deck is fabricated from SS to guard from rusty.
A hopper type feeding container is hooked up on the returned of the shaker, drilling waste may be feed effortlessly via a screw conveyor. Flushing nozzles are positioned at the pinnacle of the shaker to eliminated those blocked holes by using excessive stress drilling mud, and a anti-spraying cover is constant at the top.

2.GN Vertical Cuttings Dryer
GN Vertical Cuttings Dryer is especially used to treat OBM and SBM. Typically after dealt with by using GN vertical cuttings dryer, oil at the final cuttings is less than five%.
Flights are tough faced to HRC65 for long time usage without weariness. To maintain the display basket from blockading, an air knife gadget is likewise used to offer excessive pressure air to blow off the ones caught stones.

3.GN Vacuum Pump
GN Vacuum Pump is one switch pump particularly designed to transport high solids content material, big viscosity materials. An air compressor is used to provide driven force.
GN Vacuum Pump here are used to switch those drilling wastes discharged from shale shaker and cuttings dryer. Solids less than 75 mm may be switch under computerized strolling fame and manual mode.

written by desander desilter

May 31

GN Solids control is one of the leading solids manipulate equipment and drilling waste management structures manufacturers primarily based on China, with department business enterprise in Houston, united states of america and Moscow, Russia.
Every 12 months, GN Solids manage supply greater than 300 units decanter centrifuges and 100 cuttings dryers to global customers. Word of mouth proper popularity has introduced more and more customers to GN Solids control.
Several weeks in the past, GN Solids manage delivered some sets telescopic skid mounted cuttings dryers and centrifuges to at least one global Oilfield provider organization. Here are the primary equipment:


1.GN Telescopic Skid mounted Cuttings Dryers
GN Cuttings Dryers are specially designed to treat OBM and SBM. After handled by GN Cuttings Dryer, oil at the very last cuttings is less than five%.
GN Cuttings Dryer is using stainless-steel display basket in three openings: 0.25 microns, zero.35 microns and 0.50 microns. Automatic oil lubrication system can convey oil to the rotator’s pushed bearing and hold the display basket strolling smoothly.
Air knife system and flushing nozzles are fixed inside the shell to maintain the screen basket and discharge ring from blockading.
GN Solids manipulate in 2014 has provided to Baker Hughes Russia four sets cuttings dryers and they’re nonetheless strolling thoroughly.
These kind of cuttings dryers are provided with telescopic skid, so the running height can be adjusted simply. A lifting crane is optionally available for renovation as the screen basket might want to alternate after use a while.


2.GN Telescopic Skid Decanter Centrifuges
GN Decanter Centrifuges are widely visible in international wide oilfield for solids manipulate, barite healing.
GN centrifuge rotating bowl is made by using SS2203 04 SS2304 by means of centrifugal casting. Screw propeller is included via tungsten carbide tiles. GN Centrifuge is most effective well-known logo electrical components such ABB, Yaskawa and many others.
Those centrifuges GN Solids control supplied are 14 inch length bowl centrifuge. Explosion proof manipulate field suits for sector 1 or quarter 2 may be supplied by way of GN.
Feel free to connect to us in case you want any cuttings dryer or decanter centrifuge.

written by desander desilter

May 25

GN Solids Control last week delivered another large batch of pitless drilling waste management equipment for an international oilfield service company. GN Solids Control has rich experience on designing and manufacturing turnkey treating equipment which can be effectively used to treat different kinds of drilling waste includes OBM, WBM and SBM.

2020.05.14 High Drying Shaker

Every year, GN Solids Control provides more than 100 sets package treating systems. Here are the main treating equipment in this pitless drilling waste management system. 
1.GN Hi-G Drying Shaker
GN Hi-G Drying Shaker has a larger G force up to 8.0 G. With the excellent quality vibrator to drive the shaker deck fixed with GN made shale shakers to separate solids from drilling mud. Shaker deck is made of SS to protect from rusty.  
A hopper type feeding box is mounted on the back of the shaker, drilling waste can be feed easily by a screw conveyor. Flushing nozzles are located on the top of the shaker to eliminated those blocked holes by high pressure drilling mud, and a anti-spraying cover is fixed on the top. 

2020.05.14 Vertical Cuttings Dryer
2.GN Vertical Cuttings Dryer
GN Vertical Cuttings Dryer is mainly used to treat OBM and SBM. Usually after treated by GN vertical cuttings dryer, oil on the final cuttings is less than 5%. 
Flights are hard faced to HRC65 for long time usage without weariness. To keep the screen basket from blocking, an air knife system is also used to provide high pressure air to blow off those stuck stones. 
3.GN Vacuum Pump
GN Vacuum Pump is one transfer pump especially designed to move high solids content, large viscosity materials. An air compressor is used to provide driven force.
GN Vacuum Pump here are used to transfer those drilling wastes discharged from shale shaker and cuttings dryer. Solids less than 75 mm can be transfer under automatic running status and manual mode.

2020.05.14 Solids Vacuum Pump

written by desander desilter

May 10

Not sure how much you know about us, I guess some of you knows we manufactured BEM shaker before, quite advanced, the Elliptical Motion got many advantage: smooth function on drilling cuttings, longer screen panel stay time, anti-blocking screen hole, and drill cuttings not easy to broke etc. Especially suitable for high drilling mud viscosity, small flow rate, larger solids content and breakable drilling mud.

Well as you may hear from many operators, the BEM is idealy a good product, but if you only have this model, then there is a problem, the drilling mud is effecting the shaker balance. GN dual motion shale shaker can be used in different drilling depths and fully treat the drilling mud. Usually, GN linear shale shake is mainly used in the first and second drilling, while the elliptical motion is suitable for the further depth drilling such as ?third time drilling or even in the forth drilling.

That is also why we choose to stop the BEM shaker, there is no point to have one shaker sent to the site which is too fragile. Yet the Dual Motion shaker includes two working mode: one is linear motion and the other is elliptical motion, each mode can be adjusted by using the switch on the control box.

written by desander desilter

May 10

On April 28, 2020, the foundation laying ceremony for the office building of GN Yutian manufacturing base was opened in this sunny and recovery season. GN HQ top management team participated in the foundation ceremony and witnessed this historic moment together!

2020.04.28 2

GN Yutian production base started in 2018. After more than one year of layout design, land and building approval procedures, the first stage of workshop construction started at the end of 2019. At present the main structure of coating workshop and finished product warehouse has been completed, and it is about to enter the stage of machining equipment installation. It is expected to open the painting workshop and finished product warehouse in August 2020. The foundation laying ceremony is to start the construction of the office building. Total area of the office building is 10,000 square meters, with 6 floors. The bottom 4 floors are the office area, and the top 2 floors are the staff dormitory. GN office building is expected to complete the main construction and external decoration in 2020, and then put into use after the internal decoration is completed in the first half of 2021.

2020.04.28 6
GN Yutian R & D and manufacturing base is planned to meet the new development needs of GN. In order to meet the business expansion of oil & gas Solid Control Equipment and Drilling Waste Management Equipment, also meet the business development needs of new brand of GN: GN Separation and Conveying. In recent years, GN has introduced a number of high-end professionals and technical personnels. GN is committed to the development of industrial solid-liquid separation equipment, oil sludge treatment equipment and soil remediation equipment. GN main products include: high-end industrial centrifuges, industrial material conveying equipment, oil sludge treating equipment, etc. 

2020.04.28 8
GN newly developed equipment will help GN go to a new properous stage. In addition to meeting the high-end demand of oil & gas industry, they can also be widely used in environmental protection industry, mining industry, chemical industry, food industry and bio fuel industry, etc.

2020.04.28 5

written by desander desilter

Apr 20

Stay Safe, it will be slow in a period, but it will PASS. Despite the crisis, we sincerely hope all our clients, and whoever happen to notice this article, all it well and stay safe & good health.What you have done to contribute, you stay at home, you keep yourself yourself, you keep your family safe, you keep their life. Lots of us may have to work. Now most of China recovered and started the production. GN have started for quite a while now, recently some shakers and mud cleaners been sent to a local rig site for oil drilling production.

1.GN Drilling Mud DesanderGN drilling mud desander is largely used when eliminate solids larger than 55 microns. Drilling mud desander is shale shake fixed with multiple sets 10 inch cyclones. A centrifugal pump is usually used to feed the slurry into GN mud desander.Cyclone is using centrifugal force to separate mud under a high rotating speed after the centrifugal pump feed the mud at a high tangential speed. Due to the mud is combined with different densities solids and liquid, solids are moving upwards along with the cyclone as the centrifugal force is larger while the liquid is separated with the solids and rotated to fall off to the cyclone nipple. Eventually, solids are separated out from the the top end of the cyclones. And liquid fall on to the shaker screen panel and to be further treated.2.GN Drilling Mud DesilterGN desilter is pretty similar with GN desander. The only difference is GN desilter fixed with 4 inch cyclone groups. It is normally seen that the cyclones are all in even number. GN desilter helps to remove solids larger than 25 microns. When using different API nos. Shaker screens, the bottom shaker can have different cut point.

GN have survived in many crisis now, from the second year we start, the to a few financial crisis, yet we are getting stronger and stronger. If you will need someone to work with regarding the solids control equipment, or environmental protection equipment, GN will be a very good option.

written by desander desilter

Apr 12

GN Oil Sludge Treating System is a compact designed system, all the treating equipment can be put in standard containers for convenient move.A standard Oil Sludge Treating System is mainly composed by the following treating components:

1.GN Feeding Pump

Due to the oil sludge is usually has a larger density and high viscosity, it’s vital important to use an effective feeding pump to suck the sludge and feed into the afterwards treating unit. Here GN is using vacuum transfer pump, it’s mainly designed to transfer sludge has solids max. 80% and particles less than 75 mm.
2.GN Pre-Mixing and Heating Tank

Heating is usually seen when oil sludge need to add chemicals to dilute. Mud agitators are also used to mix the oil sludge thoroughly. A water boiler will be used to provide hot air to those pipes along the tank.

3.GN Shale Shaker Treating Unit

A submersible pump suck the diluted oil sludge and feed into GN shale shaker treating unit. Double deck shaker is widely seen and anti-sparing cover as well as flushing nozzles are fixed on the shaker to keep the shaker screen from blocking.

4.GN 2 Phase Centrifuge Treating Unit

GN 2 phase decanter centrifuge removes most of the those larger solids from the slurry discharged by shale shaker. After treated by GN 2 phase centrifuge, solids with oil is around 1%-3%. TDU might be used to further treat the solids discharged from shale shaker and decanter centrifuge.

5.GN 3 Phase Disc-Centrifuge Treating Unit

As the key treating equipment, GN 3 phase disc-centrifuge help to get much clear oil (BS & W less than 3%) and clean water (oil is 1000-3000 ppm).

written by desander desilter

Apr 05

Life goes on.

GN sludge vacuum pump is an ideal equipment to take the slurry from pit due the small footprint, compact structure and moveable design. In the meanwhile, equipped with big power air compressor, the sludge vacuum pump can suck the sludge and discharge the sludge from and to a long distance, which greatly saves the manpower and increases the working efficiency.

GN?sludge vacuum pump?is a 100 percentage pneumatic driving pump that can be used to transfer various materials ranging from liquid, slurry, wet sludge and even solid power and gravels. In many mining site, the miner is using high pressure water to flushing the ore, and then they need to dewater the ore slurry. All the ore slurry will be collected firstly in a pit waiting for transferring to the dewatering machine.

Now GN made centrifuges are classified by 9 inch bowl decanter centrifuge, 14 inch bowl centrifuge, 18 inch bowl centrifuge and 22 inch centrifuge and 30 inch bowl centrifuge. GN made 14 inch bowl centrifuge and 22 inch bowl centrifuge are widely used in solids control, barite recovery etc. Those centrifuges we provided to Russia will be used for solids control of drilling mud for different drilling rigs.?

GN Solids Control decanter centrifuge is mainly composed by rotating bowl, screw propeller, catch box and foundation etc.GN Solids Control has been upgrading centrifuges every other years based on the valuable feedback that collected from the work site. More than 200 sets decanter centrifuges are provided to global customers every year with word of mouth high remarks. GN made decanter centrifuges are upgraded in order to meet customers demands well.?

written by desander desilter

займ на карту срочно без отказаонлайн займ на карту без отказа